1_ Manhal Mansour Awda: A New Approach for Solar Arrays Deployment, University of Baghdad, College of Engineering, Mechanical Engineering Department, 1998. 2_ Bahaa Ibraheem Kazem: A New Approach for Detection and Location of Defects in Plate Structures, University of Baghdad, College of Engineering, Mechanical Engineering Department, 1999. 3_ Abbas Zghair Salman: Aerodynamic and Structures Studied of Ellipsoidal Shells, MEC, Baghdad, 2000. 4_ Safeen Yaseen Az-Deen: Simulation of Satellite Structure Under Space Environment, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2001. 5_ Saad Theeyab Faris: Elastic-Plastic Forming of Semi-Conical Shells, University of Technology, Technical Education Department, 2003. 6_ Ghanim Shaker Sadiq: Static and Dynamic Analysis of Composite Thin Cylindrical Shells, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2004. 7_ Hussain Ali Dawood: Determination of Dynamic Characteristics and Inter-Laminar Shear Stresses of Composite Plates Under Various Loading, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2004. 8_ Ammar Ali Hussain: Developing a Theoretical and Experimental, Static and Dynamical Study for Cylindrical-Conical Connection Shells, Al-Mustansiriya University, College of Engineering, Mechanical Engineering Department, 2005. 9_ Aseel Jasim Mohammed: Instructional Model for Dynamic Analysis of Plates Structure, University of Technology, Technical Education Department, 2005. 10_ Fadhel Abbas Abdulla: The Effect of Internal Flaws on The Dynamic Behavior of Composite Laminated Plates, Al-Mustansiriya University, College of Engineering, Mechanical Engineering Department, 2006. 11_ Majid Habeeb Faidh-Allah: Optimal Design of Laminated Composites under Cryogenic Environments, University of Technology, Mechanical Engineering Department, 2006. 12_ Nabil Noor Swadi: Shape Optimization of Paraboloidal Surface Reflectors under Static and Dynamic Loading, University of Technology / Al-Rasheed College of Engineering & Science, Mechanical Engineering Department, 2006. 13_ Bashar Awiad Bediawi: Nonlinear Analysis of Laminated Composite Plates Based Upon Elastic Plastic Behavior, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2006. 14_ Sabah Khammass Hussein: Linear and Non-linear Behavior of Viscoelastic Thin Plates Subjected to Uniform Distributed Loading, Al-Mustansiriya University, College of Engineering, Mechanical Engineering Department, 2006. 15_ Wafaa Mahdi Salih: Non-Linear Dynamics of Thick Composite Plates Including the Effect of Shear & Rotary Inertia, University of Technology, Technical Education Department, 2007. 16_ Hatam Kareem Kadhom: Investigation into Dynamic Stresses & DeColleges of Industrial Turbine: An Instructional Design, University of Technology, Technical Education Department, 2007. 17_ Wedad Ibraheem Al-Azzawy: Fatigue and Vibration Characteristics of Laminated Shell of Revolution, University of Baghdad, Mechanical Engineering Department, 2007. 18_ Kadhim Kamel Resan: Analysis and Design Optimization of Prosthetic Below Knee, University of Technology, Mechanical Engineering Department, 2007. 19_ Ala’a Dahham Younis: Theoretical and Experimental Analysis of Deep Drawing Process with Draw Beads, University of Technology, Production & Metallurgy Engineering Department, 2007. 20_ Salwan Hasan Thabit: Vibration Characteristics of Coupled Structures Due to Energy Flow Using Statistical Energy Analysis Method, University of Technology, Mechanical Engineering Department, 2007. 21_ Ahmed Kasim Hassan: Dynamic Analysis of Composite Tubes Subjected to Pressure Wave – an Instructional Computer Program, University of Technology, Electromechanical Engineering Department, 2007. 22_ Ali Hassan Saleh: The Effect of Die Profiles on Combined Forward – Backward Extrusion Process, University of Technology, Production & Metallurgy Engineering Department, 2008. 23_ Abbas Ahmed Ayoob: Study of Mechanical Properties of Rubber Under the Effect of Fatigue Stresses, University of Technology, Mechanical Engineering Department, 2008. 24_ Wael Rasheed Abdul-Majeed, Linear Dynamic Thermo-Elasticity of rectangular Plates, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2008. 25_ Sadiq Jaffar Aziz: Experimental and Numerical Simulation Study of Tubes Hydroforming Process, University of Technology, Mechanical Engineering Department, 2008. 26_ Azad Mohammed Ali Saber: Thermo-Mechanical Coupling For Linear And Non-Linear Analysis Composite Plates, Salahaddin University – Hawler, College of Engineering, 2009. 27_ Jumaa Salman Chiad: Analysis and Optimum Design of the Above Knee Prosthetic Socket, University of Technology, Mechanical Engineering Department, 2009. 28_ Ebtihal Abbas Sadiq: Dynamics Response of Plates Under Cryogenic Environment, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2009. 29_ Sarmad Dhia Ritha: An Investigation of Friction Stir welding And Stress Relieve By Vibration of 6061T6 Aluminum Alloy, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2009. 30_ Raid Naim Hoween Al-Dalimi: An analytical, Experimental and Numerical Investigation of Non-Linear Thermo-viscosity Behavior of Laminated Composites and Construction an Instructional Model, University of Technology, Electromechanical Engineering Department, 2010. 31_ Mohsin Abdullah Al-Shamari: Theoretical And Experimental Investigation of a Cone-Cylinder Shell Under Transient Loading, University of Technology, Mechanical Engineering Department, 2010. 32_ Emad Kamil Hassein: A Modified Version of The Prosthetic Foot, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2011. 33_ Sameer Hashim Ameen: Numerical And Experimental Investigation of Ankle-Foot Orthoses Using (Perlon-Carbon Fibers-Acrylic) Materials, Nahrain University, College of Engineering, Mechanical Engineering Department, 2011. 34_ Hussein Mohammed Hussein Al-Khafaji: Kinematic Analysis of Smart Structure Two Links Semi-Flexible Robot, University of Technology, Mechanical Engineering Department, 2011. 35_ Mahmud Raseed Ismail: Evaluating the Dynamical Behavior and Stability of Pipes Convoying Fluid, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2011. 36_ Mohammed Abd AlSatar Mohammed Shaboot: Health Monitoring of Friction Stir Welded Structures Using Vibration Measurements, Nahrain University, College of Engineering, Mechanical Engineering Department, 2012. 37_ Abdullah Dhaiaa Aasi Munshed: Experimental and Numerical Investigation of Residual Stresses in Compound Cylinders, Nahrain University, College of Engineering, Mechanical Engineering Department, 2012. 38_ Jawad Zeboon : Composite Plates Under Impact Loading , University of Basra, College of Engineering , Mechanical Eng. Dept, , 2013 39_ Yaser Y. Khatan :Experimental and Theoretical Investigation of Biaxial Fatigue Behavior of Composite Plates U.O.T. Mechanical Eng. Dept. 2014 40_ Ammar Saleem Hamid :Design and Analysis of Athletic Limb for People with special Needs. U.O.T. Mechanical Eng. Department , 2014 41_ Husam A. Kareem :Dynamic Thermo Elasticity of Plates Stiffness due to Different Heat Sources , U.O.T. Mechanical Eng. Department , July ,2015 42_ Thaer J. Nateshy ;Nonlinear Dynamic and Stability of Pipes Conveying Fluid ,AL-Nahrain University , College of Eng., Mechanical Eng. Dept. , Feb. , 2016 43_ Omar Khalid Fayadh ;Behavior of self-Compacting Steel Columns Exposed to High Temperatures , AL-Nahrain University , College of Eng. , Civil Eng. Dept. , June 2016. Supervision of MSc Students 1_ Abbas Lafta, Application of Finite Element Technique to Problem in Fracture Mechanics of Thick Walled Gun Barrels, University of Baghdad, College of Engineering, Mechanical Engineering department, 1989. 2_ Ahmed Ali Hussain: A Study Localized Buckling of in Thin Tensioned Plates with Holes, AL-Nahrain University, College of Engineering, Mechanical Engineering department, 1993. 3_ Ragheed Janan Yousif: Stresses and DeColleges of Rotating Hollow Turbine Blades, University of Baghdad, College of Engineering, Mechanical Engineering department, 1994. 4_ Mohammed Isamil Shukri Mahmud Nadim: Application of Finite Element Technique to The Analysis of Plate & Shell Structures, Nahrain University, College of Engineering, Mechanical Engineering department, 1994. 5_ Saad Zaghlool Said: Dynamic Stresses and DeColleges of Rotating Blades, AL-Nahrain University, College of Engineering, Mechanical Engineering department, 1994. 6_ Laith K. Abbas: Application of Finite Element Method to Static and Dynamic Behavior of Axi-symmetric Thin Shells with Different Types of Cutouts, MEC, Baghdad, 1994. 7_ Sameer Hashim Ameen: Static and Dynamic Behavior of Cylindrical Stiffened Shells with and without Cutouts, AL-Nahrain University, College of Engineering, Mechanical Engineering department, 1995. 8_ Ali Hussain Aleoy: Dynamic Stresses and DeColleges of Partially Pressurized Thick Cylindrical shells, MEC, Baghdad, 1995. 9_ Hatam Kareem Kadhom Al-Dafai: Finite Element Study of Gear Tooth Stresses with Presence of a Keyway; University of Baghdad, College of Engineering, Mechanical Engineering department, 1995. 10_ Bahaa Ibraheem Kazem: Defects Detection and Location in Plate Type Structures from Monitoring Frequency Changes, University of Baghdad, College of Engineering, Mechanical Engineering department, 1996. 11_ Mohammed Sellab Hamza: Stresses and DeColleges of Partially Pressurized Thick Cylindrical Shells, University of Baghdad, College of Engineering, Mechanical Engineering department, 1996. 12_ Thair Razzaq Hussain: Application of Finite Elements Methods to Stability of Shells of Revolutions, University of Baghdad, College of Engineering, Mechanical Engineering department, 1996. 13_ Abbas Mohammed Hussain: Study of Static and Transient Behavior of Solid Propellant Rocket Motor Combustion Chamber, MEC, Baghdad, 1997. 14_ Ismaeel Kh. Abdullah Al-Jubury: Finite Element Study of Static and Dynamic Behavior of Stiffened Plates, MEC, Baghdad, 1997. 15_ Ghanim Shaker Sadiq: Determination of Dynamic Stresses and DeColleges in Thick Cylinders Subjected to Impulsive Loading, Nahrain University, College of Engineering, Mechanical Engineering department, 1997. 16_ Wedad Ibraheem Al-Azzawy: Finite Elements Modeling of Intersected Plates Found in CNC Milling Machine, University of Baghdad, College of Engineering, Mechanical Engineering department, 1997. 17_ Ali Ibraheem Hassan: Vibration Analysis of Hollow Shafts Stiffened Internally and Externally by Rings Using Finite Elements Method, MEC, Baghdad, 1997. 18_ Abdul Wahab Nima Al-Ani: Static and Dynamic Behavior of Thick Cylinder Subjected to Internal Transient Pressure, University of Baghdad, College of Engineering, Mechanical Engineering department, 1998. 19_ Ammar Jabour Khlil: Flutter Analysis of Aircraft Wing, MEC, Baghdad, 1998. 20_ Wisam Saadoon Ibrahim: Static and Dynamic Behavior of orthotropic Laminated Plates Subjected to General Loading Condition, University of Baghdad, College of Engineering, Mechanical Engineering department, 1998. 21_ Ebtihal Abbas Sadiq: Elastic and Elasto-Plastic Analysis of Stepped Thick Cylindrical Shells; University of Baghdad, College of Engineering, Mechanical Engineering department, 1998. 22_ Bashar Awaid Bedawi AL-Shewely: Finite Element Study of a Profiled Nozzle, University of AL-Mustansirya, College of Engineering, Mechanical Engineering department, 1999. 23_ Tarik Hassan ELsoni: Aerodynamic and Structural Design of a Jet Trainer Aircraft Wing, MEC, Baghdad, 2000. 24_ Salwan Abdul Kareem Khaz’al: Analysis of Stiffened and Unstiffened Shells of Revolution Subjected to Air-blast Loading, University of Baghdad, College of Engineering, Mechanical Engineering department, 1999. 25_ Ayman Mohammed Osman Mohammed: Investigation of Dynamic Loading Effects on the Design of Solid-Propellant Rocket Motor Combustion Chamber, MCE, Baghdad, 2000. 26_ Kasim Abbas Attya: Thermal and Rotation Effects on Dynamic Stresses, DeColleges and Vibrations of Rotating Gas Turbine Blades, University of Baghdad, College of Engineering, Mechanical Engineering department, 2000. 27_ Moayad Rajab AL-Kubaycy: Investigation of the Transient Response of Composite Laminated Plates Including the Effect of Cutout, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2000. 28_ Nazar Abdul-Kareem Hussain: Static and Dynamic Behaviour of Aircraft Fuselage Subjected to Aerodynamic Loading, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2000. 29_ Fadhel Abbas Abdulla: Analysis of Composite Plates Subjected to Impact Load, University of AL-Mustansirya, College of Engineering, Mechanical Engineering Department, 2001. 30_ Mohammed Rameedh Ghargan: Optimum Design of Aircraft Wing Structure Using Finite Element Method, University of Technology, Mechanical Engineering Department, 2001. 31_ Oday Ibraheem Abdullah: Investigation of Blades Failure of An Axial Fan, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2003. 32_ Issam Kadhim Jassim: Dynamic Analysis of Spur Gear Teeth Using Finite Element Technique, University of Baghdad, College of Engineering, Mechanical Engineering Department, 2003. 33_ Muhannad Lafta Shlaga: Analysis of Stiffened and Unstiffened Composite Plates Subjected to Time Dependent Loading, University of Kuffa, College of Engineering, Mechanical Engineering Department, 2005. 34_ Asaad Khudhair Mizher: Stress Analysis for Die Casting By Using Finite Element Method, University of Technology, Production Engineering and Metallurgy Department, 2005. 35_ Mazin Ismail Jabbar: Dynamic Analysis and Synthesis RSCR Special Mechanism, AL-Mustansirya University, College of Engineering, Mechanical Engineering Department, 2004. 36_ Nasser Hammed Farhood: The Analysis of Aerodynamic and Structural Design for Delta Wing Configuration, University of Technology / Al-Rasheed college of engineering and science, Mechanical Engineering Department, 2004. 37_ Hamad Mohammed Hasan: Analysis of Compressor Rotor Blade Subjected to Mechanical and Thermal Stresses, University of Technology / Al-Rasheed college of Engineering and Science, Mechanical Engineering Department, 2005. 38_ Salah Hajee Abed A’on: The Analysis of Subsonic Companied Wing Design Using Organic Ideal Technology; University of Technology, College of Engineering, Mechanical Engineering Department 2005. 39_ Amer Fadhil Nori: Numerical and Analytical Investigation of Rotating Turbine Rooters Subjected to Thermal and Mechanical Loading, University of Technology, Technical Education Department, 2005. 40_ Triq Samir Talib: Flutter Speed Limits of Subsonic Wings, University of Technology, Mechanical Engineering Department, 2005. 41_ Amal Aayez Abdulla: Analysis of Spur Gear Set by Finite Element Method, Foundation of Technical Education, Technical College of Baghdad, 2005. 42_ Bakir Nori Khider: Optimum Shape and Location of Opening in Syme’s Prosthesis Under General Loading, Nahrain University, College of Engineering, Mechanical Engineering Department, 2005. 43_ Wisam Oday Hussain: Non-Linear Dynamic Analysis of Spur Gear, Analytical and Numerical Studies, University of Technology, Mechanical Engineering Department, 2005. 44_ Ali Hammoudi Abdul-Kareem: Structural Stability of Composite Plate with Presence of Cutouts, Foundation of Technical Education, Technical College-Baghdad, 2005. 45_ Abdul-Monim Razoki Majeed: Stress Analysis of Trans Tibial Prosthetic Socket, Foundation of Technical Education, Technical College-Baghdad, 2005. 46_ Najah Restom Muhsin: Determination the Dynamic Characteristics of a Fan Blade Used in Al-Nassiriyah Power Plant, Foundation of Technical Education, Technical College-Baghdad, 2005. 47_ Ahmed Noori Uwayed: Analysis of Thin Tensioned Composite Plates with Different Types of Cutouts, University of Al-Anbar, College of Engineering, Mechanical Engineering Department, 2005. 48_ Arz Yahya Rzayeg: Linear Viscoelastic Behavior Composite Beams, University of Al-Anbar, College of Engineering, Mechanical Engineering Department, 2005. 49_ Haidar Hadi Khaleel: Determination of Inter Laminar Stresses and DeColleges of Composite Beams Subjected to Time Dependants Loading, Nahrain University, College of Engineering, Mechanical Engineering Department, 2005. 50_ Ali Kammel Jabr: Stability of Stiffened and Unstiffened Thin Shell of Revolution, University of Technology / Al-Rasheed college of Engineering and Science, Mechanical Engineering Department, 2005. 51_ Wssam Abelsada Khlewi: Linear Dynamics of Thick Plates Including the Effect of Shear and Rotary Inertia, University of Technology, Mechanical Engineering Department, 2005. 52_ Lawrence Ameer Petrus Alous: Experimental and Numerical Investigation of Composite Tubing Subjected to General Loading, Nahrain University, College of Engineering, Mechanical Engineering Department, 2006. 53_ Alaa Abdul Zahra Dalli: Dynamic Buckling of Composite Laminated Plates, University of Kuffa, College of Engineering, Mechanical Engineering Department, 2006. 54_ Haidar Saadi Esaa Al-Saadi: Effect of Particulated Addititives on the Characteristics of Composite Materials, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2007. 55_ Nabeel Shallal Thamer Al-Muramdy: Mechanical Properties of Composites Using Natural Rubber with Epoxy Resin, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2007. 56_ Ibraheem Talal Hussain: Manufacturing and Analysis of T-Branch Components Using Bluge Forming (Tube Hydroforming) Processes, Nahrain University, College of Engineering, Mechanical Engineering Department, 2007. 57_ Ammar Dawood Ghali: Theoretical and Experimental Analysis of Tube Sinking Process, Foundation of Technical Education, Technical College of Baghdad, 2007. 58_ Hassan Majeed Hamed: A Study of Low Velocity Impact of Composite Laminated Plates, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2007. 59_ Baraa Mahdi Jassim: Static and Dynamic Characteristics of Composite Plates AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2007. 60_ Ali Jameel Hassan: Effect of Shape and Location of Cutout on the Dynamic Response of Thin Cylindrical Shells, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2008. 61_ Zaid Mohammed Salih: Biaxial Testing of Fiber Composites To Evaluate The Fxy Factor Of Tsai-Wu Stress Failure Theory, Nahrain University, College of Engineering, Mechanical Engineering Department, 2008. 62_ Anwar Jumaa Ahmed: Strengthening of PVC Pipes Against Axial, Bending, Torsional and Combined Loading Using GFRP Composites, Nahrain University, College of Engineering, Mechanical Engineering Department, 2008. 63_ Mustafa Ibrahim Salim: The Effect of Support Conditions on Vibration Characteristics in a Pipe Conveying Fluid, AL_Nahrain University, College of Engineering, Mechanical Engineering Department, 2008. 64_ Omar Oday Salman: Investigation of Mechanical Properties of Epoxy with Ceramic Materials, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2009. 65_ Ghaith Ghanim Hameed: Springback and Sidewall Curl of U-Shape Metal Sheet Forming, AL_Nahrain University, College of Engineering, Mechanical Engineering Department, 2009. 66_ Zahid Ibrahim Mohammad: A Theoretical Study into the Vibration Characteristics of Different Cross-Section Pipes with Different End Conditions, University of Technology, College of Engineering, Mechanical Engineering Department, 2009. 67_ Husain Mohan Suker: Characteristics of Laminated Composite Plate Due To Fatigue Load, AL_Nahrain University, College of Engineering, Mechanical Engineering Department, 2009. 68_ Sidqi Mohammed Sadik: Buckling of Composite Plates with Different Types of Cutouts, AL_Nahrain University, College of Engineering, Mechanical Engineering Department, 2009. 69_ Ammar Basil Nadir: Study of Mechanical and Physical Properties of Cupper-Alumina Composite Produced by Powder Metallurgy, Nahrain University, College of Engineering, Mechanical Engineering Department, 2009. 70_ Shayma Hameed Mohammed: Experimental and Numerical Investigation into Fatigue of Below-Knee Prosthetic Socket, Foundation of Technical Education, Technical College of Baghdad, 2010. 71_ Mohanad Najeh Mohammed: Optimal Analysis and Design of a Pylon for the Prosthetic Below Knee, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2010. 72_ Zaid Ghalib Abdulkadhim: Investigation of Mechanical Properties of Elastomers, AL-Nahrain University, College of Engineering, Mechanical Engineering Department, 2010. 73_ Ali A. Najim :Study of Failure Mode in Bolt Adapter of Prosthetic SACH Foot , AL-Nahrain University , College of Eng., Mechanical Eng. Dept., 2013 74_ Ahmad Adnan Annoz : Vibration of Pipes Conveying Fluid , AL-Nahrain University , College of Eng., Mech. Eng. Dept., 2013 75_ Bashar K. Abdul-Razzaq :Theoretical and Experimental Investigations of Creep and Buckling Effects on Composite Columns. , Baghdad University , College of Eng,, Mech. Eng. Dept., 2013 76_ Zainab M. Hwaidi : Evaluating the Dynamic Behavior of Multi-discs and Journal Bearing Rotors, AL-Nahrain University , College of Eng., Mech Eng. Dept, 2014 77_ Jana S. Jaffar : vibration Measurements and analysis of through Knee Prosthesis , AL-Nahrain University , College of Eng. , Mech. Eng. Dept. , Dec. 2015 . 78_ Saif M. Abbas :Analysis , Design and Manufacturing of ankle Foot Orthesis Using Different gait Cycle Scenarios , , AL-Nahrain University , College of Eng., Mech Eng.Jan.t, 2015 79_ Nawzad K. Khareem : Numerical and Experimental Investigation of Tool Geometry Effects in Friction Stir Processing of Aluminum Alloys. , Jan. 2016 . 80_ Mustafa A. Kodi :Comparison of Creep Relaxation and Fatigue Capabilities of Composite Prosthetic Foot Material and SACH Foot BKA ,, AL-Nahrain University , College of Eng., Mech Eng. April 2016 81_ Muhannad A. AL-Saadi ; Experimental and F.E. Analysis of a Modified Patellar Tendon Bearing Ortheses Patients with Heel Vicers, AL-Nahrain University, College of Engineering, Mech. Eng. Dept., Jan., 2017 Supervision of Diploma Students: 1_ Rahem Na’em Hwien: Study of the Stress Distribution on Piston Heads Using the Finite Element Method, MCE, Baghdad, 1985. 2_ Jawad Ubaid Al-Abid: Determination of Optimum Thickness for a Regeneratively Cooled Rocket Thrust Chamber with Storable Liquid Propellant, MCE, Baghdad, 1990. 3_ Munjed Salih Mahdi: Design of Liquid Propellant Rocket Tanks, MCE, Baghdad, 1995. 4_ Salam Attia Kurjy Al-Janaby: Theoretical Studies for Modification of Hydraulic Presses Design, University of Baghdad, MCE, Baghdad, 1998. 5_ Abu Elnur Abdeen Ali Abu Elnur: Determination of Optimum Shape and Location of Cutout in Thin Tensioned Plates, Sudan University for Science & Technology, 2001.

1_ Hussain J. Abbas and Muhsin J. Jweeg “Application of Vibrational Methods for Prediction of Bonding Forces Using Fast Fourier Transform” Proceedings of International ASME Conference, Signals and Systems, Brazil, Vol. 2, pp. 185-196, 1988 2_ Muhsin J. Jweeg and Nabil M. Motosh “Determination of Optimum Rim Thickness in Toothed Gear Wheels” Scientific Journal of M.E.C., No. 4,pp.131-144, 1989. 3_ Muhsin J. Jweeg, B. H. Abdshebib and N. M. Motosh “Investigation of Involute Gear Tooth Critical Section” Scientific Journal of MEC, No. 5, pp. 64-85, 1989. 4_ Najdat A. Mahmood, Muhsin J. Jweeg and Mumtaz Y. Rajab “An Investigation of Partially Pressurized Thick Cylindrical Shells” Modeling, Simulation and Control, B, ASME Press, Vol. 25, No. 3, PP. 47-64, 1989. 5_ Muhsin J. Jweeg and Hussain J. Abbas “A Fast Technique for the Prediction of Quality Factor of a Vibrational System” International, ASME Conference Signals and Systems, Brighton, U.K, Vol. 6, pp. 129-140, July 12-14, 1989. 6_ Muhsin J. Jweeg and Nabil M. Motosh “Forming of Semi Conical Shell: Elastic Phase of Deformation” International Conference, Signals and Systems, Brighton, U.K, ASME Press, Vol. 6, pp. 9-20, July 12-14, 1989. 7_ Muhsin J. Jweeg “Application of Finite Element Method to Study the Stress Distribution in Shell of Revolution Subjected to Non-Axisymmetric Loading” Intern. ASMS Conference, Signals and Systems, Cetinje, Yougoslavia, Vol. 5, pp. 3-14, Sep. 3-5, 1990. 8_ Muhsin J. Jweeg, Adnan N. Jamil and Abbas Lafta “Application of the Finite Element Method to Elastic Stress Analysis of a Cracked Thick-Walled Pressure Vessel” Modelling, Simulation and Control, B, ASME Press, Vol. 37, No. 2, PP. 37-50, 1991. 9_ Nabil M. Motosh and Muhsin J. Jweeg “Study of Edge Stresses In Partially Pressurized Cylindrical Shells” Scientific Journal of M.E.C., No. 8, pp. 94-107, 1991. 10_ Nabil M. Motosh and Muhsin J. Jweeg “Study of Rotating Axi-Symmetrical Shell” Scientific Journal of M.E.C., No. 7, pp. 30-48, 1991. 11_ Mumtaz Y. Rajab, Najdat A. Mahmood and Muhsin J. Jweeg “Study of Thermal Failure of Gun Barrels” Scientific Journal of M.E.C., No. 6, pp. 65-83, 1991. 12_ Kasim A. Khalf and Muhsin J. Jweeg “Precision Cutting of Blanks by Axial Stress” Scientific Journal of M.E.C., No. 9, pp. 63-72, 1992. 13_ Imad A. Hussain and Muhsin J. Jweeg “Optimum Thickness of Symmetric Angle-Ply Laminates to Eliminate Extensional and Bending Stiffnesses” Journal of the Institution of Engineering, India, Vol. 74,pp. 99-104, November, 1993. 14_ Muhsin J. Jweeg, Imad A. Hussain and Balsam H. Abed “Reduction of Noise and Increasing Strength of the Gear Tooth Using Unsymmetrical Generating Rack” The 2nd Engineering Scientific Conference M.E.C., March 22-24, 1994, Special Issue of the MEC Journal No. 14. 15_ Najdat A. Mahmood, Muhsin J. Jweeg and Ahmed A. Hussain “A Study of Localized Buckling in Thin Tensioned Plates with Holes” Engineering and Technology, University of Technology, Baghdad, Iraq, Vol. 13, No. 13, pp. 133-153,1994. 16_ Muhsin J. Jweeg and S. Z. Said “Effect of Rotational and Geometric Stiffness Matrices on Dynamic Stresses and DeColleges of Rotating Blades” Journal of the Institution of Engineers, India, Vol. 76,pp.29-38, May 1995. 17_ Muhsin J. Jweeg and Laith. K. Abbas “Static and Dynamic Behavior of Un stiffened Thin Cylindrical Shells with Cut Out Using FEM” Engineering and Technology, University of Technology, Baghdad, Iraq, Vol. 15, Nos. 1 & 2, Jan-Feb. 1996. 18_ Muhsin J. Jweeg “Static Bending Deflections and Flexural Frequencies of Prismatic Cantilever Tapered Beams by Galerkin’s Method” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 4, No. 3, pp.13-24, December 1997. 19_ M. J. Jweeg, A. N. AL-Timimy and B. I. Kazem “Detection and Location of Defects in a Plate Structure by Vibration Technique” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 4, No. 3,31-47, Sep. 1998. 20_ Muhsin J. Jweeg and Samir H. Ameer “Static and Dynamic Response of Stiffened Thin Cylindrical Shell with and without Cutouts” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 4, No. 2, pp. 91-115, March 1998. 21_ A. N. AL-Timimy, M. J. Jweeg and M. M. Awda “Solar Array Deployment” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 4, No. 1,81-94, March 1998. 22_ M. J. Jweeg, A. N. AL-Timimy and W. AL-Azzawy “Finite Element Modeling of Column of CNC Milling Machine for Static Rigidity and Natural Frequencies” Journal of the Iraqi Society of Engineers-serial-151-No. 3. Pp.13-27, 2002. 23_ Bahaa I. Kazem , M. J. Jweeg and Adnan N. AL-Timimi “Damage Effect on The Transient Response of a Plate Structure Subjected To a Suddenly Applied Load” The 3rd Jordanian Mechanical & Industrial Engineering Conference JMIEC, pp. 1-10, May 1999. 24_ Ebtihal A. Sadiq, Adnan N. Jamil and Muhsin J. Jweeg “Elsto-Plastic Analysis of Stepped Thick Cylindrical Shells” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 5, No. 2, pp. 185-210, 1999. 25_ Muhsin J. Jweeg, Adnan N. Jamil and Wisam S. Ibrahim “Analysis of Symmetric and Antisymmetric Laminated Plates by Introducing Shear Deformation and Rotary Inertia Effects Using a Refined Higher Order Shear Theory” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 5, No. 2, pp. 211-239, 1999. 26_ Muhsin J. Jweeg, Ghanim Sh. Sadiq and Najdat A. Mohamood “A Suggested Analytical and Numerical Solutions for Dynamic Stresses and DeColleges of Thick Cylinders Subjected to Time Dependent Loading” Journal of M.E.C., NO. 20, March, pp 1-21, 2000. 27_ Muhsin J. Jweeg, A. N. Jamel and S. A. Khazas “Effects of Air Blast Loading on the Analysis of Stiffened and Un stiffened Shells of Revolution” The 3rd Engineering Scientific Conference M.E.C., Baghdad, pp. 530-544,2000. 28_ Muhsin J. Jweeg, S. S. Hassan and A. M. Osman “Transient Response Analysis of Solid Rocket Motor Combustion Chamber” The 3rd Engineering Scientific Conference M.E.C., pp.194-202, 2000. 29_ Muhsin J. Jweeg and Ali H. Aleoy “Dynamic Stresses and DeColleges of Partially Pressurized Thick Cylindrical Shells” MEC, NO. 19, Feb. 2000. 30_ Muhsin J. Jweeg and Ismaeel K. AL-Jibury “Numerical and Experimental Investigations of Stiffened Plates under Bending Loads” MEC, NO. 19, Feb. 2000. 31_ Adnan D. Mohamed and Muhsin J. Jweeg “A Suggested Method for Determination the Coupling between the Structure and Noise Fields in a Cavity” Scientific Journal of M.E.C., No. 20, pp. 46-66, Mar. 2000. 32_ Adnan N. AL-Tamimi, M. J. Jweeg and Bahaa I. Kazem “Effectiveness of the Degeneration Shell Element with an Assumed Shear Strain Field in Free Vibration Analysis of Plate Structures” A Scientific Journal, College of Engineering, University of Baghdad, Vol. 6, No. 3,pp. 191-208, 2000. 33_ Adnan N. AL-Tamimi and Muhsin J. Jweeg “Determination of Stresses and Deformation of Hollow Turbine Blades” The First Regional Conference for Mechanical Engineering Metallurgy and Material Engineering, Kufa University, pp. 1-9, 17-19 Oct, 2000. 34_ M. J. Jweeg, Adnan N. AL-Tamimi and Bahaa I. Kazem “A New Approach for Identification Failure Position in Symmetrical Plate Structure” The 1st National Conference of Mechanical, Metallurgy and Material Engineering, 7-19,Oct 2000. 35_ K.I. Mahmoud, M. J. Jweeg and A. J. Khalil “Determination of Flutter Speed of an A/C Wing” The 3rd Engineering Scientific Conference M.E.C., pp. 111-120, March 2000. 36_ Muhsin J. Jweeg, Mumtaz Y. Rijab, and A. Bedawi “Analysis of a Profiled Nozzle” M.E.C. The 3rd Engineering Scientific Conference M.E.C., pp.424-436, 2000. 37_ M. J. Jweeg, A. N. Jamil, H. K. Kadhom “Study of Gear Tooth Stresses with the Presence of a Keyway” Scientific Journal of M.E.C., No. 18, pp. 65-91, Feb. 2000. 38_ Muhsin. J. Jweeg, Adnan N. Jamil and Thair R. Hussain “Bifurcation Buckling of Shell of Revolution” Scientific Journal of M.E.C., No. 20, pp. 22-45, March 2000. 39_ Adnan N. Jamil, M. J. Jweeg, Moayad R. AL-Kubaycy “Investigation of the Transient Response of Composite Laminated Plates Including the Effect of Cutout” Scientific Journal, College of Engineering, University of Baghdad, Vol. 7, No. 1, pp. 121-161, March 2001. 40_ Muhsin J. Jweeg, Adnan N. Jamel, Kasim A. Attya “Thermal Gradient Effects on The Dynamic Stresses, DeColleges and Vibrations of Rotating Gas Turbine Blades” Scientific Journal, College of Engineering, University of Baghdad, Vol. 8, No. 4, , pp. 287-306, Dec. 2002. 41_ Muhsin J. Jweeg and Samera K. Radi “Analysis of Composite Plates Subjected to Impact Loading Part II: Numerical solution:” Journal of Engineering and Development, Vol. 11 No. 2 , PP. 69-86, Sept. 2007. 42_ Muhsin J. Jweeg and Safa. H. Abdulrahman “Vibration Analysis of Hollow Shaft Stiffened Internally and Externally by Rings Using Finite Element Method” The Second Regional Conference of Mechanical, Metallurgy and Material Engineering, Kufa University, College of Engineering, 2-4, 2002. 43_ A.N AL-Timimy, Muhsin J. Jweeg and W. AL-Azzawy “Finite Element Modeling of Transient Response of CNC-Milling Machine Column” AL-Muhandis-Journal of the Iraqi Society of Engineers, No. 3, Sept 2002. 44_ Adnan N. Jamil, Muhsin J. Jweeg, Mahmod F. Edan and Safeen Y. Az-deen “The Effect of Space Environments Factors on Spacecraft Structure” Scientific Journal, College of Engineering, University of Baghdad, Vol. 9, No. 1, pp. 77-88, March 2003. 45_ Muhsin J. Jweeg, Mohammad Qasim and Issam K. J. “Effect of Design Parameters on the Location of the Weakest Section and Stress Concentration of Spur Gear Tooth” the 5th Scientific Conference, College of Engineering, Baghdad University, 25-27,pp. 585-599, Feb 2003. 46_ A. N. Al-Timimy, Muhsin J. Jweeg and G. S. Sadiq “Thermal and External Load Effects on Static Bending Simply Supported Circular Cylindrical Composite Shells” The 5th Scientific Conferences College of Engineering, University of Baghdad, 25-27, Feb. 2003. 47_ Hussain A. Dawood, Adnan N. Jamil and Muhsin J. Jweeg “An Elasticity Solution for Calculating Inter Laminar Stresses in Laminated Composite Plates Under Various Loading” The 5th Scientific Conferences College of Engineering, University of Baghdad, 25-27, Feb. 2003. 48_ Adnan N. Al-Tamimi, Muhsin J. Jweeg and Nazar A. Hussain “Arbitrarily Laminated, Anisotropic Stiffened and Unstiffened Cylindrical Shell under Internal Pressure” Al-Rafidain Engineering, Vol. 11, No. 2, pp. 27-38. 2003. 49_ Muhsin J. Jweeg, A. S. Kasim and Oday I. Abdullah “Stress Analysis of Axial Flow Fan” The 5th Scientific Conferences of College of Engineering, University of Baghdad, 25-27, Feb. 2003. 50_ Muhsin J. Jweeg, Adnan N. Jamil and Hussain A. Dawood “A New Development of Interply Delamination Criterion (Idc) for Composite Laminates” International Mechanical Engineering Conference IMECE, Kuwait,pp. 498-520, Dec. 5-8, 2004. 51_ Muhsin J. Jweeg, Shaker S. Hassan and Ali B. Assi “Investigation of the Thermal Effects on the Static Characteristics of Cylindrical – Conical Intersection” Scientific Journal, College of Engineering, University of Baghdad, Vol. 10, No. 4, pp. 491-505, Dec. 2004. 52_ Muhsin J. Jweeg, Ahmed A. Hussain and Ali H. Alwazeer “Composite Structure Stability in the Presence of Cutout” The 5th South African Conference on Computational and Applied Mechanics (SACAM), 14 December 2005. 53_ Kamal K. Saify, Adnan N. Al-Timimy and Muhsin J. J. “The Timoshenko Three-Beams Technique To Estimate The Main Elastic Moduli of Orthotropic Homogeneous Materials” Al-Khwarizmi Engineering Journal, Vol. 1, No. 2, pp. 52-63, 2005. 54_ Muhsin J. Jweeg, Abbass Z. Salman, Naseer H. Farhood “Strength Analysis of Delta Wing Structure with Different Configurations” Engineering & Technology Journal, Vol. 24, No. 8, pp. 1107-1127, 2005. 55_ Muhsin J. Jweeg, Fahim Al-Himdani, Mazin Islail “Dynamic modal Analysis and Synthesis of RSCR Spatial Mechanism” Engineering & Technology Journal, Vol. 24, No. 8, pp. 1033-1051, 2005. 56_ Muhsin J. J., A. B. Assi., A. A. Al. Filfily “The Effect of Pressure and Thermal Loading on the Static Behavior and Cylindrical-Conical Shell Intersections with linear Thickness Distribution” Amman Conference, Dead Sea, Jordan, Civil Engineering, 10-13 April, 2006. 57_ Muhsin J. J., Adnan D. M. and Majid H. F. “Optimal Design of Graphite/Epoxy Composite Laminate Plate Under Cryogenic Environment Experimental and Numerical Investigations” 4th Jordanian Civil Engineering Conference, Jordan, 10-13 April, 2006. 58_ H. T. Rasheed, Muhsin J. Jweeg and A. A. Al-Waeeli “Modeling and Analysis of Partially Pressurized Thick Cylindrical Shells Subjected to Thermal Loading” Nahrain University, College of Engineering Journal NUCEJ, Vol. 9, No. 1, pp. 67-88, 2006. 59_ Muhsin J. Jweeg, Samira K. Radhi and Sabah K. Hussein “Analytical, Theoretical and Experimental Investigation of Linear Viscoelastic Thin Plate Deflection with Two Edges Fixed and the Other Two Simply Supported” Journal of Engineering and Development, Vol. 11, No. 1, pp. 104-122, March 2007. 60_ Muhsin J. Jweeg, Ahmed A. Al-Beiruti, Kadhim K. Al-Kinani “Design and Analysis of New Prosthetic Foot” Al-Khwarizmi Engineering Journal, Vol. 3, No. 1, pp. 12-25, 2007. 61_ Muhsin J. Jweeg, Samira K. Radhi and Haider F. Feama “An Experimental Comparative Study Between Polypropylene and Laminated Lower Limb Prosthetic Socket” Al-Khwarizmi Engineering Journal, Vol. 3, No. 1, pp. 35-41, 2007. 62_ Muhsin J. Jweeg and Wedad I. Alazzawy “A Suggested Analytical Solution for Laminated Closed Cylindrical Shells Using General Third Shell Theory (GTT)” Nahrain University, College of Engineering Journal NUCEJ, Vol. 10, No. 1, 2007. 63_ Muhsin J. Jweeg, Shokat Al-Tornachi and Tariq Samir Talib “Flutter Speed Limits of Subsonic Wings” Journal of Engineering, College of Engineering, University of Baghdad, Vol 18, No. 2, pp 163-183, Feb, 2012. 64_ Muhsin J. Jweeg, Ahmad A. AL-Beruti and Kadhim K. Resan “Design a New Below Knee Socket and study the Pressure Distribution and Stresses Developed ” Journal of Arabian Union Universities for Engineering Sciences, Baghdad University Vol. 15 , No. 2 , PP. 1-24, 2008 65_ Muhsin J. Jweeg, Sameera A. Abed Al-wahed and Wafaa M. Salih “Nonlinear Dynamics of Thick Composite Laminated Plates Including the Effect of Transverse Shear and Rotary Inertia” The 1st Regional Conference of Eng. Sci. NUCEJ, Spatial Issue, Vol. 11, No. 1, pp.251-262, 2008. 66_ Qasim M. Doos, Muhsin J. Jweeg and Sarmad Dhia Ridha “Analysis of Friction Stir Welds. Part I: Transnet Thermal Simulation Using Moving Heat Source” the 1st Regenal Conference of Eng. Sci. NUCEJ Special Issue, Vol. 11, No. 3, pp. 429-437, 2008. 67_ Muhsin J. Jweeg, Shawkat J. Al-Tornachi and Salah H. Abid-Aum “Optimization of Light Weight Aircraft Wing Structure” Journal of Engineering & Development, Vol. 12, No. 1, pp. 1-22, March 2008. 68_ Muhsin J. Jweeg and Bakr N. Al-Hassan “Optimum Shape and Location of Opening in Syme Socket Prostheses Under General Loading” Journal of Al-Rafidain Engineering, College of Engineering, University of Mosul, Vol. 16, No. 1, pp. 59-74, 2008. 69_ Muhsin J. Jweeg, Adnan D. Mohammed and Nabil N. Swadi “A Novel Deployable Open Ends Support Reflector” Eng. & Tech., Engineering and Technology Journal, University of Technology Vol. 26, No. 8, pp 894-906, 2008. 70_ M. J. Jweeg, S. S. Hasan and J. S. Chiad “Effect of Lamination Layers on the Mechanical Properties for Above Knee Prosthetic Socket” University of Technology, Eng. And Technology Journal, Vol. 27, No. 4, pp. 759-775, 2009. 71_ Jamal Hussien Muhamed, Muhsin J. Jweeg and Ali Hassan Saleh “The Effect of Area Reduction of Forward Die on the Combined Forward-Backward Extrusion Process” AL-Nahrain University, College of Engineering Journal NUCEJ, Vol. 12, No. 2, pp. 108-121, 2009. 72_ Muhsin J. Jweeg, Ammar A. Al-Filfily and Ali B. Assi “The Effect of Thermal Loadings on the Dynamic Behavior of Cylindrical – Conical Intersection Shell” University of Technology, Eng. & Tech. Journal, Vol. 27, No. 4,pp. 831-851, 2009. 73_ Ghaith G. Hameed, Muhsin J. Jweeg and Ali Hussain “Springback and Side Wall Curl of Metal Sheet in Plain Strain Deep Drawing” Medwell Journals, research and Journal of Applied Sciences, pp. 192-202, September 2009. 74_ Muhsin J. Jweeg and Wisam Auday Hussain “Contact Stresses for Different Gear Design Parameter” Eng. & Tech. Journal, Vol. 27, No. 13, pp. 2274-2300, 2009. 75_ Muhhsin J. Jweeg and Ali Jameel Hassan “Effect of Shape and Location of Cutout on the Vibration Frequencies of Thin Composite Cylindrical Shells” The 6th Engineering Conference, College of Engineering, Mechanical and Nuclear Engineering, Vol. III, pp. 270-284, 5-7 April, 2009. 76_ Muhsin J. Jweeg, Wedad I. Al-Azzawy and Ebtihal A. Sadiq “Free Vibration of Composite Laminated Plate Subjected To Cryogenic Environments” The 6th Engineering Conference, College of Engineering, Mechanical and Nuclear Engineering, Vol. III, pp. 175-191, 5-7 April, 2009. 77_ Muhsin J. Jweeg and Wedad Al-Azzawy ”Free Vibration Analysis For Laminated Truncated Conical Shells Using High Order Theory” The 6th Engineering Conference, College of Engineering, Vol. III, pp. 208-225, 5-7 April, 2009. 78_ Muhsin J. Jweeg, Samira k. Radi and Fadhel A. Abdullh “Effects of Internal Flaws in Static and Dynamic Behavior of Composite Plates” Emirates Journal for Engineering Research 15(2), pp.18-28, 2010 79_ Muhsin J. Jweeg and Zahid Ibrahim Mohammed “Vibration Characteristics of Different Cross-Section Pipes with Different End Conditions” Eng. & Tech. Journal, Vol. 28, No. 8, pp. 1634-1654, 2010. 80_ Jamal Hussain Mohammed, Muhsin J. Jweeg and Ali Hasan Saleh “Investigation of Friction Condition Through Radial Tip in the Combined Forward-Backward Extrusion Process” Dirasat, Engineering Sciences, Jordan, Vol. 37, No. 2, pp. 183-193, 2010. 81_ Azad Mohammed Ali Saber, Safeen Yaseen Ezaldeen and Muhsin J. Jweeg “Thermo Mechanical Coupling of Laminated Composite Plates Using Finite Element Method” 3rd International Conference, Advanced Composite Material Engineering COMAT, Romania, pp. 273-278, 27-29 October 2010. 82_ Muhsin J. Jweeg and Wedad I. Alazzawy “A Study of Free Vibration and Fatigue for Cross-Ply Closed Cylindrical Shells Using General Third Shell Theory (GTT)” Journal of Engineering, Baghdad University, Vol. 16, No. 2, pp. 5170-5184, June 2010. 83_ Muhsin J. Jweeg, Adnan M. Al-Sultany and Raed Naeem Hwyyin “Nonlinear Analysis of Thermo-Viscoelasticity of Laminated Composites” Eng. & Tech. Journal, Vol. 28, No. 14, pp. 2010. 84_ Muhsin J. Jweeg, Adnan D. Mohammed and Mohsin A. Alshamari “Theoretical and Experimental Investigations of Vibration Characteristics of a Combined Composite Cylindrical-Conical Shell Structure” Eng. & Tech. Journal, Vol. 28, No. 24, 2010. 85_ Muhsin J. Jweeg, Ali Hussain Al-Hilli and Hussain Mohan Suker “Experimental Study of Fatigue Characteristics of Laminated Composite Plates” Journal of Engineering, Vol. 16, No. 2,pp. 5185-5198, June 2010. 86_ Muhsin J. Jweeg and Kadhim K. Resan Al-Kinani “Design and Analysis of a New Prosthetic Foot” the 5th International Symposium on Advanced Science and Technology in Experimental Mechanics, Japan, pp. 4-7 November, 2010. 87_ Muhsin J. Jweeg, Abudul Rahman Najim Abed and Nawfal A. Abdulrazzag “Evaluation of Mechanical Properties of Particulate Composites” Al-Khawarizmi Engineering Journal, Vol. 6, No. 4, pp. 72-83, 2010. 88_ Qasim M. Doos, Muhsin J. Jweeg and Sarmad Dhia Ridha “Analysis of Friction Stir Welds Part II: Transient Thermal Stresses and Residual Stresses Using Moving Heat Source” The 2nd Regional Conference for Engineering Sciences, Al- Nahrain University, pp. 256-265, pp. 256-265, 1-2 December, 2010. 89_ Muhsin J. Jweeg, Ali Hussain Al-Hilli and Mustafa Ibrahim Salim “Effect of Support Conditions on Vibration Characteristics in a Pipe Conveying Fluid” The 2nd Regional Conference for Engineering Sciences, Al- Nahrain University, pp. 338-354, 1-2 December, 2010. 90_ Adnan N. Jamel, Muhsin J. Jweeg and Bashar A. Bedaiwi “Elastic-Plastic Analysis of Thermoplastic Matrix-Reinforced Steel Fibers Using Finite Element Method” F.T.E. Scientific International Conference, 12-14 April, 2010. 91_ Muhsin J. Jweeg, Adnan N. Jameel and wael R. Abdul-Majeed “Thermal Buckling Temperature of Rectangular Plates With Different Temperatures Distribution and Ends Condition Using Strain Energy Method” Accepted for Publication, Journal of Engineering, College of Engineering, University of Baghdad, No. 5, Vol. 17, 1047-1065, Oct., 2011. 92_ Muhsin J. Jweeg, Shakir S. Hassan and Emad K. Hussein “Calculation of a Dorsiflexion Angle of a Prosthetic Foot For Amputees By Using Developed Tactile Displacement Sensor” Diyala Journal of Eng. Sciences, pp. 76-91, 22-23 Dec. 2010. 93_ Azad Mohammed Ali Saber, Safeen Y. Ezalddin and Muhsin J. Jweeg “Elastic Stress Analysis of Laminated Composite Plate Experimentally” 3rd International Conference, Advanced Composite Material Engineering COMAT, Romania, Vol. 2 pp. 1-8, 27-29 October 2010. 94_ Muhsin J. Jweeg, Ahmdd A. Hussain and Wisam Abed Al-Sada Kuleiwi “The Linear Vibrational Behavior of Thick Plate Including the Effects of Shear and Rotary Inertia” Nahrain University, College of Engineering Journal NUCEJ, Vol. 13, No. 1, pp. 13-28, 2010. 95_ Jumaa Salman Chiad, Muhsin J. Jweeg and Shaker S. Hasan “A Suggested New Material Used A-K Prosthetic Socket Lamination” The Iraqi Journal For Mechanical & Material Engineering, Special Issue For 2nd International Conference, College of Engineering, 172-187, 2010. 96_ Muhsin J. Jweeg, Kadhim K. Resan and Muhanad N. Mohmmed “Design and Manufacturing of a new Prosthetic Low Cost Pylon for Amputee” Journal of engineering and Development, Vol. 14, No. 4, pp. 119-126, December 2010. 97_ Muhsin J. Jweeg “Evaluation of AL-Nahrain University , College of Engineering Study Plan Term and Quarter Basis” The Development Conference for the University Education of Agriculture and engineering Colleges , AL-Kufa University , 11-12 April, 2011 98_ Imad A. Hussain, Muhsin J. Jweeg and Muhsin N. Hamza “Boundary Elements Modeling for Small/Large Strain Analysis of Elastomeric Materials” Journal of Engineering, University of Baghdad, Vol. 16, No.1,pp. 4726-4748, March, 2010. 99_ Albert E. Yousif, Muhsin J. Jweeg and Mahmud R. Ismail “Stability Boundary for Conservative Pipes Conveying Fluid” The 11th International Mechanical Engineering & Exposition IMECE, USA, November 11-17, 2011. 100_ Albert E. Yousif, Muhsin J. Jweeg and Mahmud R. Ismail “An Analytical Approach for Evaluation the Flutter Instability Boundaries for Cantilever Pipes Conveying Fluid” The 11th International Mechanical Engineering & Exposition IMECE, USA, November 11-17, 2011. 101_ Albert E. Yousif, Muhsin J. Jweeg and Mahmud R. Ismail “Closed-Form Solution for Evaluating the Principal Instability Regions for Conservation Pipes Conveying Pulsating Flowing Fluid” The 11th International Mechanical Engineering & Exposition IMECE, USA, November 11-17, 2011. 102_ Muhsin J. Jweeg and Sameer H. Ameen “Experimental and Theoretical Investigations of Dorsiflexion Angle and Life of an Ankle – Foot – Orthosis Made From (Perlon/Carbon Fiber/Acrylic) and Polypropylene Materials” Journal of JSEM, Vol. 11, Special Issue, pp.305-310, 2011. 103_ Muhsen J. Jweeg and Sameer Hashim Ameen “Mechanical Behavior of Perlon-Carbon Fiber-Acrylic Materials of a New Design of Ankle-Foot-Orthosis” Nahrain University, College of Engineering Journal NUCEJ, Vol. 15, No. 1, pp. 18-28, May, 2012. 104_ Muhsen J. Jweeg, Albert E. Yousif and Mahmud R. Ismail “Experimental Estimation of Critical Buckling Velocities For Conservative Pipes Conveying Fluid” Journal of Engineering, Al-Khwarizmi College of Engineering, University of Baghdad, Vol. 7, No. 4, pp. 17-26, November, 2011. 105_ Muhsin J. Jweeg and Ammar D. Ghali “Theoretical and Experimental Analyses of Tube Sinking Process” International J. of Eng. Research & Industrial. Applications. IJERIA, Vol. 4, No. IV, pp. 393-420, November 2011 106_ Muhsin J. J., Moneer H. T. and Mohammed A. M. “Theoretical and Experimental Investigation of Transient Temperature Distribution in Friction Stir Welding of AA 7020-T53” Journal of Engineering, College of Engineering, University of Baghdad, Vol. 18 No 6, pp. 693-709, June 2012 107_ Muhsin J. Jweeg, Moneer H. Tolephih and Muhammed A. M. “Effect of Friction Stir Welding Parameters (Rotation and Transverse) Speed on the Transient Temperature Distribution in Friction Stir Welding of AA 7020-T53”, ARPN Journal of Engineering and Applied Sciences, Vol. 7, No. 4, p436-446, April- 2012. 108_ Muhsin . J. Jweeg , Moneer . H. Tolephih , Fadhel .A. Abdulla and Muhammed .A.Sattar , “Numerical and Experimental Analysis of Transient Temperature and Residual Thermal Stresses in Friction Stir Welding of Aluminum Alloy 7020-T53”, AL-Mustansirya University, College of Engineering Conference for the Postgraduate Students, 7-8 May, 2012. . 109_ Muhsin J. Jweeg , Ali S. Hammood and Muhannad AL-Waily , “Experimental and Theoretical Studies of Mechanical Properties For Reinforcement Fiber Types of Composite Materials”, International Journal of Mechanical and Mechatronics Engineering IJMME-IJENS vol.12 , no.04 , August 2012 . 110_ Abdulrahman Abed , Muhsin J. Jweeg and Omar O. Salman , “Mechanical Properties of Ceramic Particulate-Filled Polymer Hybrid Composite” , The First National Conference For Engineering Sciences Fnces 12 ,AL-Nahrain University, College of Eng. November 7- 8 , 2012. 111_ Muhsin J. Jweeg , Mahmud R. Ismail , Ahmed A. Anoze , “An Alternative Approach For Evaluating The Natural Frequencies and Stability of Elastic Rotors” , The First National Conference for Engineering Sciences Fnces 12 , AL-Nahrain University, college of Eng.- November 7- 8 , 2012. 112_ Muhsin J. Jweeg , Ali S. Hammood and Muhannad AL-Waily , “A Suggested Analytical Solution of Orthotropic Composite Plate Structure With Crack Effect”, International Journal of Mechanical and Mechatronics Eng., IJMME-IJENS Vol.12, No: 05, Oct 2012, 44- 58. 113_ Muhsin J. Jweeg , Riyah N.kiter and Ahmed N. Uwayed , “Transient Analysis of Composite Plates With Different Types of Cutout” Anbar Journal Engineering Sciences , Ajes-2012 , Vol.5, No.1. 114_ Muhsin J. Jweeg , Ali S. Hammood and Muhannad AL-Waily , “Experimental and Numerical Study of Oblique Crack Effect on Natural Frequency of Different Composite Plate Structure Types”, Asian Transactions on Engineering (ATE ISSN: 2221-4267) Volume 02 , lssue 05, pp. 81-91, Nov. 2012. 115_ Muhsin J. Jweeg , Ali S. Hammood , and Muhannad AL-Waily ,”A Suggested Analytical Solution of Isotropic Composite Plate with Crack Effect”, International Journal of Mechanical and Mechatronics Engineering IJMME-IJENS Vol:12 No:05 pp. pp. 44-58. October 2012. 116_ Muhsin J. Jweeg , Ali S. Hammood and Muhannad AL-Waily , “Analytical Solution to Oblique Crack Effect For Difference Composite Material Plates”, ARPN Journal of Science and Technology , Vol.2 , No.8 ,pp. 697-714, Sep 2012. 117_ Muhsin J. Jweeg , Wedad I. AL-Azzawy and Ebtihal A. Sadiq “Dynamic Response of Composite Plates Under Cryogenic Environment”, International Conference On Mechanics of Nano, Micro, and Macro Composite Structures, Politecnico di torino, Department of mechanical and Aerospace Eng., , Italy,18 to June 2012. 118_ Mohammad Q. Abdullah , Muhsin J. Jweeg , “Analytical Solution of Bending Stress Equation for Symmetric and Asymmetric Involute Gear Teeth Shapes with and Without Profile Correction”, Innovative Systems Design and Engineering , Vol. 3, No.6 , pp. 19-33, 2012. 119_ Wael R. Abdul-Majeed , Muhsin J. Jweeg and Adnan N. Jameel , “Restrained Edges Effect on the Dynamics of Thermoplastic Plates under Different End Conditions”, AL-Khwarizmi Engineering Journal , Vol.8 , No.2 , PP1-11 (2012). 120_ Mohammad Q. Abdullah , Muhsin J. Jweeg , “Simulation of Generation Process For Asymmetric Involute Gear Tooth Shape with and without Profile Correction”, Innovative Systems Design and Eng., pp. 53-67 , vol.3 , No.6 , 2012. 121_ Muhsin J. Jweeg , Moneer H. Tolephih and Muhammed A. M. “Theoretical and Experimental Investigation of Transient Temperatures Distribution in friction stir welding of AA- 7020-T53” Journal of Engineering, Baghdad University, Vol.18, No. 6, June 2012. 122_ Muhsin J. Jweeg , Adnan D. Mohammed and Mohsin A. AL-Shamari “A Study of The Effect of Semi-Angle of Cone on The Vibration Characteristics of Cylindrical-Conical Coupled Shell Structure”, Journal of Engineering Volume 18 , No 5, pp. 651-660, May 2012. 123_ Muhsin J. Jweeg, Shaker S. Hassan, and Yaser Y. Kahtan “Experimental Investigation of the Cruciform Specimen of GFR16 Under Biaxial Monotonic and Cyclic Loading ” International Journal of Science and Eng. Research , Vol. 4, Issue 12, Dec 2013. 124_ Muhsin J. Jweeg , Kadhim K. Resan and Mustafa Tariq , “Study of Creep-Fatigue Interaction In A Prosthetic Socket Below Knee”, Asme 2012 International Mechanical Engineering November 9-15 , 2012 , Houston , Texas , USA. 1_ Mohsin J. Jweeg ,Shaker S..Hasan and Yassr Y.kahtan “Parametric study and Numerical Modeling of CFRP cruciform specimens under biaxial loadings”, international journal of mechanical engineering and technology (IJMETE) , volume 4, issue 5, September – October (2013), pp. 313-322. 2_ Ahmed Hasson , Muhsin J. Jweeg . “Potential for Solar Power to Pump Saline Groundwater and Management”, International Journal of Enhanced Research in Science Technology and Engineering , vol. 2 Issue 1 , Jan – 2013. 3_ Muhsin J. Jweeg , Muhannad AL-Wally , “Analytical Investigation of time Dependent Tensional Loading of Stiffened and UN-Stiffened Composite Laminated Plates”, International Journal of Mechanical and Production Engineering Research and (Ijmperd) , vol.3, Issue 4, Oct 2013 , 83 – 96. 4_ Ahmed Hasson , Muhsin J. Jweeg , “Soil Organic Carbon Sequestration Under Pastures in Arid Region”, Nature Environment and Pollution Technology An International Quarterly Scientific Journal , vol.12 , No.1 , pp.57-62 , 2013. 5_ Mustafa Tariq Ismaail , Muhsin J. Jweeg and Kadhim Kamil Resan , “Study of Creep-Fatigue Interaction in The Prosthetic Socket below Knee” Innovative Systems Design and Engineering , vol.4, no.5, 2013. 6_ Ahmad A. Hasson, and Muhsin J. Jweeg “Potential for Solar Power to Pump saline Ground Water and Management” 7_ Alaa Dahham , Azal Refat and Muhsin J. Jweeg , “Finite Element Analysis of Draw Beads in Deep Drawing Processes”, Al Rafidain engineering journal ,Mosul University, College of Eng., Vol .22 No.1 ,Feb.2014. 8_ Muhsin J. Jweeg , Abdal-Kareem F. Hassan and Jawad K. Zeboon , “Experimental and Numerical Investigation of The Dynamic Characteristic of Laminated Composite Plate Hybrid With Steel”, International Journal of Mechanical Eng. , vol.3 , Issue.1 , Jan , 2014, 27-36 . 9_ Muhsin J. Jweeg , Abdul-Kareem F. Hasan and Jawad K. Zeboon , “Investigation of Impact Response For CFRP-Steel Hybrid Composite Plate Under Low-Velocity Impact”, International Journal of Mechanical Eng. , vol.3 , Issue.2 , Mar.2014 , 1-8. 10_ Muhsin J. Jweeg , Moneer H. Tolephih and Abdullah D, Assi : Evaluationg of New Hypothetical Concept (LHSIR) for Die Profile for Hydrostatic Extrusion of Al/Mg Compound , Diayala Journal of Eng, Science Vol. 07 11_ Muhsin J. Jweeg and Hussain M. AL-khafaji : Compensating the End-Effector Position of a Semi-Flexible Robot , Basrah , University , The first International Conference of Mechanical Engineering BICME2014 , Basrah , Iraq , 2014 12_ Muhsin J. Jweeg , Shakis S. Hassan and Ammar S. Hamid : Impact Testing of New Athletic Prosthetic Foot , International Journal of Current Eng. ,Vol. 5 , No. 1 , Feb. 2015. 13_ Muhsin J. Jweeg , Muhannad L. AL-Waily and Alaa A. Deli : Theoretical and Numerical Investigation of Buckling of Orthotropic Composite Plates ,International Journal of Mechanical and Mechatroncs Eng. IJMME-IJENS, Vol. 15 , No. 04 , 2015 14_ Muhsin J. Jweeg and Thaier N.J. Ntayeesh :Investigation of Vibration Characteristics and Stability of Pipes Conveying Fluid Using Smart materials , International Journal of science and Research (IJSR) ,Vol. 4 , Issue 12 , pp. 1-12, Dec. 2015. 15_ Muhsin J. Jweeg , Ayad M. Takhakh , and Nawzad K. Kareem : Comparison Between Friction Stir Welding (FSW) and Friction Stir Processing (FSP) of AA5086 Aluminum Alloy , International Journal of Science and Research (IJSR) , Vol. 3 , Issue 6 ,pp. 205-210, Dec. 2015. 1_ Muhsin J. Jweeg and Thaier N.J. Ntayeesh : Active Vibration Control of Pipes Conveying Fluid Using Piezoelectric Actuators , International Journal of Multi displinary Engineering Science and Technology , JMEST , Vol. 2 , Issue 8 ,pp. 2122-2130, Aug. 2015 2_ Muhsin J. Jweeg and Haider. Y. Ahmad” Experimental and Numerical Estimation of Instability Critical Velocities of Pipes Conveying Fluid ” 13th European Fluid Machinery Congress , Institution of Mechanical Engineers , London, U.K., 3-5 Oct. 2016. 3_ Muhsin J. Jweeg and Muhannad L. Al-Waily : Numerical and Experimental analysis of Cross-Ply and angle-Ply of Composite Laminated Plates Having Various Shapes of Cutouts , Energy and Environment Journal , Applied Mechanics section , Vol. 7 , Issue 6 , pp. 443-456, 2016 . 4_ Muhsin J. Jweeg :A suggested Analytical Solution of Vibration of Honeycomb sandwich Composites Structure , International Journal of mechanical and mechatronics JMME-IJENS, Vol. 16, No. 02, pp. 1-9, Aug. 2016. 5_ Muhsin J. Jweeg and Jana S. Jaffar : Vibration Analysis of a Prosthesis for Through Knee Amputation , Journal of Engineering , AL-Nahrain University ,NUCEJ , Vol. 19,. No. 1 , PP 46-55 , 2016 6_ Muhsin J. Jweeg , Ayad M. Takak and Saif M. Abbas : Characterization of Materials Used in Manufacturing of above Foot Orthoses , Accepted for publication , International Journal of Energy and Environment , Applied Mechanics Section , 2016 7_ Muhsin J. Jweeg and Thaier J. Ntayeesh: Determination of Critical Buckling Velocities of pipes Conveying Fluid Rested on different Supports Conditions , International Journal of Computer Applications , Vol. 134 – No. 10 ,Jan. 2016. 8_ Husam A. kareem , Muhsin J. Jweeg and Shaker S. Hassan : Drifting Dynamic Characteristics of heating Load for Aluminum Alloy 7075 T6 , First International Conference on Engineering and Sciences Applications , Kerbala University , College of Engineering , 2015 9_ Hani M. Fahmi , Muhsin J. Jweeg and Omar K.halid : Behavior of Self-Consolidating Concrete Filled Steel Tube Columns Exposed to High Temperatures , 15th Specialized Scientific Conference, AL-Mansour University College, 23-24 April , 2016 10_ Muhsin J. Jweeg, Kadhim K. Resan and Ali A. Najim ” Study and Analysis of Failure Mechanism of Bolt Adapter in Prosthetic SACH Foot” Journal of Eng. and Technology, No. 6, pp. 1442-1506, 2014. 11_ Muhsin J. Jweeg, Kadhim K. Resan and Ali A. Najim” Study and Analysis of Fatigue Failure (Bolt Adapter) of Prosthetic SACH Foot” International Journal of Mechanical and Production, Eng. Research and Development (IJMPERD), Vol. 4 , Issue 2 , pp. 1-8, Apr. 2014. 12_ Muhsin J. Jweeg, and Muhannad L. AL-Waily” Determination of Inter-Laminar Shearing Stresses Using A Suggested Analytical Solution in the Composite Laminated Plates” International Journal of mechanical Engineering, Vol. 2 , Issue 5, pp. 45-60, Nov. 2013. 13_ Mahmud R. Ismail and Muhsin J. Jweeg ” Natural Frequencies of Multi-Irregular span Beams Under Elastic Supprts by Modal Analysis Method” AL-Nahrain University, College of En. Journal(NUCEJ), Vol.18, No. 2, pp. 284-293, 2015. 14_ Muhsin J. Jweeg, and Muhannad L. AL-Waily” Dynamic Analysis of Stiffened and Unstiffened Composite Plates, The Iraqi Journal for Mechanical and Material Eng., Vol. 13, No. 4, pp. 689-714, 2013. 15_ Muhsin J. Jweeg, and Sameer H. Ameen”Experimental and Theoretical Investigations of Dorsflexion Angle and Life of an Ankle-Foot-Orthosis Made From (Perlon-Carbon Fibfre-Acrylic) and Polypropylene Materials”, 19th Symposium on Experimental Solid Mechanics, Germany, pp. 16-26, 25-28th May, 2011. 16_ Muhsin J. Jweeg, Mahmud R. Ismail, and Zainab M. Hwady” Theoretical and Experimental Investigation of the Dynamical Behavior of Complexx Configuratiopn Rotors” Baghdad university, Journal of Eng. , Vol. 20, pp.106-,Feb. 2015. 17_ Muhsin J. Jweeg, and Muhannad L. AL-Waily”Analytical Investigation of Time Dependent Tesional loading of Stiffened and Unstiffened Composite Lamintaed Plates” Onternational Journal of Mechanical and Production, Vol. 3, Issue 4, pp. 83-96, Oct. 2013. 18_ Muhsin J. Jweeg, and Thaeer J. Ntayeesh “Dynamic Analysis of Pipes Conveying Fluid Using Analytical and Experimental Verification with the aid of S mart Materials, International journal of science and Research(IJSR),Vol. 4, Issue 12, pp. 1594-1605,Dec. 2015. 19_ Muhsin J. Jweeg, and Thaeer J. Ntayeesh “Active Vibration Control of a Cantilever Pipe Conveying Fluid Using Smart Mterial” Innovative Systems Design and Engineering< Vol. 6, No. 12, pp.53-79, 2015. 20_ M.J.Jweeg, E.Q. Hussein : Effects of Cracks on the Frequency Response o a Simply Supported Pipe Conveying Fluid , International Journal of Mechanical nad Mechatronics Eng., IJMME-IJENS, Vol. 17, No: 05, 2017. 21_ Kadhim K. Resan, Abbas A. Alassadi, Mihannad AL-Waily, Muhsin J. Jweeg,: iInfluence o Temperature on Fatigue Life for the Friction Stir Welding of a Aluminuum Alloy Materials, International Journal of Mechanical nad Mechatronics Eng., IJMME-IJENS, Vol. 18, No: 02, 2018. 22_ Muhsin J. Jweeg, Emad Q. Hussein, and Karrar Ibrahim Mohammed : A suggested Analytical Solution or Dynamic Behavior of a Cracked Pipe Conveying Fluid, International Journal o energy and Environment, Vol: 09, Issue 01, 2018. 23_ Ameer A. Kadhm, Muhanned AL-Waily, Zaman Abdul Almalik Abud Ali, Muhsin J. Jweeg, and Kadhim K. Resan : Improvement Fatigue Life and Strength of Isotropic Hyper Composite Materials by Reinforcement with Different Powder Materials, Vol: 18, No: 02, 2018. 24_ Ehab N Abbas, Muhsin J. Jweeg, Muhannad Al- Waily: Fatique Characterization of Laminated Composite Used in Prosthetic Sockets Manufacturing, Journal of Mechanical Engineering Research and Development, Vol. 43, No. 5 pp. 384-399, 2020. 25_ Muhannad Al-Waily, Mohsin A. Al-Shammari, Muhsin J. Jweeg: An Analytical Investigation of Thermal Buckling Behavior of Composite Plates Reinorced by Carbon Nano Particles, Engineering Journal, Vol. 24,Issue 3, 2020. 26_ S.E. Sadiq, S.H. Bakhy. And M.J.Jweeg: Crashworthiness Behavior conf. series, Materials Science and Engineering 881(2020)

– Title : Design and Manufacturing of Foot for the Below Knee Amputees , No. 3431 , date12/9/2012 International Classification : AF1F1/06 , Iraqi Classification : 6 Dr. Muhsin J. Jweeg , Dr. Khadim k. AL-Kinani , Dr. Ahmad A. AL-Beruti -Title: Biaxial Mechanism for Universal Tests , No. 3691 , date ; 21/11/2013 International Classification GO1L1 / 100 , GO1M1/100 ,.Iraqi Classification 24 Dr. Muhsin J Jweeg , Dr shakir S. Hassan , Dr. Yaser Y. Khatan No. 4212 , date : 24/5/2015 -Title: Design and Manufacturing Device for Testing the Interaction Between Creep and Reverse Bending Fatigue, International Classification Go1L1/06, GO1L5/16, Iraqi Classification 20, No: 4740, date: 19/11/2016 Dr Kadhim K. Resan, Dr Muhsin J. Jweeg, and Mustafa T. Ismael -Title: Instrument for Fatigue testing of Below Knee Athletics Prostheses International Classification : AG1F2/00 , GO1N3/00 , GO1N1/00 , Iraqi Classification : 6 Dr. Ammar H. Merza , Dr. shakir S. Hassan , Dr. Muhsin J. Jweeg. -Title: Design of a Device to Mesures the Lie of an Industrial Foot at Different Environments, International Classification A61F2/54, Iraqi Classification 20, No: 5313, date 3/4/2018 Dr Kadhim K. Resan, Dr Muhsin J. Jweeg, and Eng. Esraa A. Aboud. -Title: Manufacturing of a Damper for Vibration Resulting from Fluid Movement in Piping System, Iraqi Classification 6, No: 5762, date 9-5-2019.